PCV windows and doors

VEKA is a sign of the highest quality window profiles known all over the world. In Poland, profiles have been produced for over 20 years at the factory in Skierniewice from raw material supplied by cisterns from the home plant VEKA AG in Germany and have the same quality as those produced in the factories in Germany, Spain, etc. When buying windows with VEKA profiles, you can be sure that we buy the best-class product. But how can you be certain that it is VEKA windows?

Once the windows has already been installed in the building then the only way is to inquire the window producer or by viewing the signature visible on the pane when removed from the frame. It is impossible to view the the producer logo once installed. 

On the other hand before installing you could read the logo yourself. First, the widows leaving the factory are protected with safety foil where VEKA logo is shown. They should reach the building site wrapped in the foil. Second, VEKA marks their products with number signatures. They are as follows: VEKA 103304 EN 12608 SIIA 0022 9 RMa 5501 04 tF 08/05/2014 11:28 that generally read the profile derives from VEKA item number 103304, manufactured in Poland (5501) on 08/05/2014. 

Those are placed onto the window-frame inside (that’s why it is impossible to view it) as well as on the permanent post in the grove ready for fittings.  

Are there any other mark places?  Inside the profile on the line beading? However, as it was stated earlier those are visible once the panes are replaced from the window.

It is worth to remember that VEKA has all quality certificates. 


Ultramodern windows profile system VEKA ARTLINE is a breakthrough solution concerning the functionality and design. Its uniqueness is focused on the frameless glazing that means when seeing the window from the outside the frame position is disguised behind the assembly profiles and then cover it with the building insulation (e.g. polystyrene). Disguising the window frames achieves larger then ever window panes comparing to the classical ones. Such an approach proves the purity of the architecture design both in the brand new buildings and the renovated ones.

Multi-chamber geometry and 82 mm depth ARTLINE system proves the high quality profile heat transfer coefficients in non-insulated buildings at Uf=1,0 W/m2K. Eliminating any heat loss by insulting and covering the frames will lower considerably the potential heat bridges and approach the the indexes of a passive house.

The standard ARTLINE system option includes three gasket system (outer, centre and inner) insulting noise, cold and humidity, perfectly. The center gasket is installed firmly to the casing frame.


When you need perfection








Free quote




ul. Marcelińska 52,
60-354 Poznań
tel. 882 480 838